{"product_id":"paicar-fine-cut-compound-copy","title":"Paicar Heavy Cut Compound","description":"\u003cdiv class=\"gspb_id-gsbp-93779b32-59ba gspb-tabs wp-block-greenshift-blocks-product-tabs\"\u003e\n\u003cdiv aria-labelledby=\"tab-title-description\" role=\"tabpanel\" id=\"tab-description\" class=\"gspb-tabs-panel gspb-tabs-panel--description active\"\u003e\n\u003cp class=\"p1\"\u003eDesigned to deliver effective and versatile correction, this compound is ideal for removing heavy swirl marks, moderate scratches and noticeable defects, including sanding marks between P1500 and P2000.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eIts balanced water-based formula ensures smooth and controlled workability, allowing the operator to achieve consistent results with minimal risk of secondary defects. Thanks to its versatility, it can be used with rotary polishers for more aggressive correction, or with dual-action polishers for a more refined and controlled finish.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eIts composition allows a progressive removal of defects, making it perfect for intermediate correction work on new, used, or repainted finishes. The product removal is extremely easy, reducing working time and simplifying the cleaning process.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e1.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSurface preparation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eMake sure the surface is clean and properly decontaminated (thorough wash, clay bar if necessary).\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eCompletely dry the panel before starting the polishing process.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e2.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePad choice\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eFor more aggressive correction: use a microfiber pad with a rotary polisher.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eFor a superior finish: use a medium foam pad with a dual action polisher.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e3.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eProduct application\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eShake the bottle well.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eApply 3–4 drops of product onto the pad.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eSpread the compound over the panel with the machine turned off, lightly dabbing it on.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e4.\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eWork process\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eStart spreading PAICAR 01 at the lowest speed.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eGradually increase the speed to activate the abrasive action,\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eWork in areas of approximately 40×40 cm (16×16 in), using cross-hatch passes (horizontal and vertical).\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eApply light pressure, keeping the pad flat on the surface.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e5.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eResult inspection\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eAfter 3–4 passes, stop the polishing cycle (approximately 2 minutes).\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eRemove the residue with a clean, soft microfiber towel.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eInspect the panel with an inspection light to verify the removal of defects.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e6.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFinishing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eIf necessary, proceed with a finishing polish to increase gloss and depth. Protect the surface with a sealant or wax.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cstrong\u003ePro tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eAlways work in controlled environments, avoiding direct sunlight.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eClean or replace the pad regularly to avoid saturation.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eAlways test the product on a small area first before proceeding on the entire vehicle.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eCut level: 9\/10\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eFinish level: 6\/10\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eColor: white\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eOdor: light and pleasant\u003c\/p\u003e\n\u003cp class=\"p1\"\u003ePhysical state: creamy\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eStorage: 5–30°C\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Paicar","offers":[{"title":"250ML","offer_id":51728047571265,"sku":"PAI-600761","price":30.23,"currency_code":"CAD","in_stock":true},{"title":"1L","offer_id":51728047604033,"sku":"PAI-600672","price":75.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/3791\/1617\/files\/heavy-32-shadow-copia-800x800.webp?v=1778793670","url":"https:\/\/www.crystalbrite.ca\/products\/paicar-fine-cut-compound-copy","provider":"Crystal Brite Detailing Supplies Ltd.","version":"1.0","type":"link"}